A+ A A-
EnglishEspañol

OPTICLEAR E

OptiClear E is an odorless cleaning solvent for optical and electronic components. OptiClear E is our fastest evaporating OptiClear formulation, and it leaves no residue. This eliminates the need for a post wash. OptiClear E is also nonconductive. OptiClear E can be used to remove wax and pitch; however, the necessary soaking time is longer than that required for the original OptiClear.

1.Use undiluted.

2.Set up an OptiClear E bath at room temperature and soak components for 15 minutes to 1 hour. Heating is not recommended. For lighter cleaning applications, OptiClear E can be used as a spray.

3.Remove components from bath and allow OptiClear E to evaporate.

4.OptiClear E does not leave a residue, so a post-rinse is not necessary.
Ref. OE-104-1GAL
Cantidad. 1 Gal
OE-104-1GAL.jpgOE-104-1GAL.jpg

Contact

If you wish to contact us you please call us at:

Teléfono+34 91 659 22 07

or through our simple contact form.

 

mas

Budget

Request here your budget, we will anwser you during the day.


Invalid enter

Invalid enter

Invalid enter

Invalid enter

Legal Advise     |     HartBiomédica©2012     |     Contact

twitter2 en

Web site Powered by logo_skinpixel